Lista utenti taggati

Pagina 1 di 115 123456789101151101 ... UltimaUltima
Risultati da 1 a 10 di 1142

Discussione: Codifiche varie VCDS - A3 8V/8VA - VAG 12.12

  1. #1
    Bannato
    Data Registrazione
    Aug 2013
    Messaggi
    276
    Thanked: 1
    Menzionato
    messaggio(i)
    Taggato
    discussione(i)
    Provincia
    Verona (VR)
    Auto
    A2

    Predefinito Codifiche varie VCDS - A3 8V/8VA - VAG 12.12

    Menu Nascosto sistema di navigazione MMI PLUS

    Procedere così :
    1. Il menu engineering può essere abilitato con la combinazione di tasti "Indietro"(1) + il pulsante di navigazione (2) insieme



    Come resettare l'MMI

    Il sistema MMI di Audi A3 8V può essere resettato. Se la vostra A3 MMI non da nessuna risposta a ingressi, nessuna commutazione delle voci menù, nessuna uscita audio da altoparlanti ecc ecc . è possibile utilizzare i pulsanti descritti in grado di riavviare il sistema MMI.


    1. L'MMI può essere ripristinato utilizzando il i tasti: Menù"1" + tasto di conferma "2" e tasto di navigazione "3" per resettare. L'MMI si spegne e poi si riavvia. Dura circa 30 secondi.


    Attivazione dell'illuminazione ambientale sull'MMI

    E' possibile sbloccare l'illuminazione ambientale per poterla controllare dall'MMI.


    1. Selezionare funzione 09 (cablaggio)
    2. Funzione 07
    3. Byte 17
    4. Bit 3 - Abilitazione luce ambiente nel MMI
    5. Bit 2 - Attiva luce ambiente in tutte le zone - anteriori - vano piedi
    6. Bit 1 - Attiva luce ambiente illuminazione porta


    Abilitare / disabilitare il blocco dell'unità CD / DVD di espulsione


    Se la vostra auto proviene da un noleggio può essere che sia stato ablitato il blocco.

    1. Selezionare funzione 5F (Information Elec.)
    2. Funzione 10
    3. Selezionare il canale espulsione CD.
    4. Cambiare il valore da bloccato ad attivato per disattivare il blocco



    Riduzione specchio passeggero in retromarcia

    Si abbassa automaticamente lo specchio lato passeggero quando viene messa la retromarcia.

    1. Selezionare STG 52
    2. Funzione 07
    3. Byte 04
    4. Abilita bit 2
    5. Abilita bit 3


    Attivazione del segnale acustico PDC e Retromarcia

    Questo ci permette di attivare il tono di attivazione retromarcia o quando si attiva PDC.


    1. Selezionare funzione 10
    2. Funzione 10
    3. Selezionare il tono di attivazione di ausilio al parcheggio
    4. Regolare il valore (default: attiva)


    Abbassamento audio in retromarcia

    In retromarcia, il volume nella MMI non viene ridotto.


    1. Selezionare funzione 10
    2. Funzione 10
    3. Selezionare battuta d'arresto audio
    4. (default: Sì)



    Attivazione rappresentazione visiva dei sensori di parcheggio (APS Audi Parking System)

    Si può sbloccare la visualizzazione dei sensori di parcheggio tramite MMI, anche se si possiedono solamente i sensori posteriori "pacchetto base".


    1. Selezionare funzione 10 (PDC)
    2. funzione permesso di accesso - selezionare la funzione 16
    3. Inserisci il codice di accesso 71679
    4. Coding -> Selezionare la funzione 07
    5. Selezionare byte 2
    6. Bit 0 - visualizzazione del sensore di parcheggio - Attivo



    Disabilitare spia e tono cintura di sicurezza nel quadro strumenti

    E' possibile disattivare l'avviso delle cinture di sicurezza sia nel display del quadro strumenti e sia acustico


    1. Selezionare funzione 17
    2. funzione regolazione -> Funzione 10
    3. Selezionare disabilitare gli avvisi cintura di sicurezza
    4. passare a "sì" (di default: nessuno)
    possibile anche così:
    1. Selezionare funzione 17 (instrument)
    2. funzione codifica -> Funzione 07
    3. Byte 0
    4. Disable Bit 2



    Attivazione del timer / contatore lap lap in FIS

    E' possibile avere un lap timer e contagiri nel FIS (Driver Information System).


    1. Selezionare funzione 17
    2. Funzione 07
    3. Byte 1
    4. Abilita bit 3



    Regolazione della sensibilità del microfono

    E' possibile utilizzare le seguenti istruzioni per regolare la sensibilità del microfono in modo da consentire una migliore qualità della voce.


    1. Selezionare funzione 5F (infotainment)
    2. Funzione 10
    3. Selezionare Microphone sensitivity (sensibilità del microfono)
    4. inserire il nuovo valore cercate di non superare il valore 12!!!



    Visualizzare l'indicatore della temperatura dell'olio nel FIS laptimer

    è possibile attivare la temperatura dell'olio nel FIS (Driver Information System). Esso verrà visualizzato nel quadro strumenti.


    1. Selezionare funzione 17 (instrument)
    2. Funzione 07
    3. Byte 1
    4. Abilita bit 3


    Disattivazione del messaggio / tono di accensione

    E' possibile disattivare il messaggio di accensione. Così abbiamo spento il tono fastidioso quando all'accensione la portiera del conducente è aperta.


    1. Selezionare funzione 17 (instrument)
    2. Funzione 10
    3. Ignition messaggio attivo
    4. Cambia in "Nessuna visualizzazione" (valore di default: porta del conducente)


    Abilita Pointer Test / Staging

    1. Selezionare funzione 17 (instrument)
    2. Funzione 07
    3. Byte 1
    4. Attivare il bit 0


    Modificare distanza massima avviso sensori laterali di parcheggio

    Selezionare STG 10 (PDC 2)
    Funzione 10
    Selezionare "distance to the curb"
    Regolare il valore corrispondente (default: 15 cm)


    Visualizzare nel FIS il cambio marcia Suggerito

    1. Selezionare STG 17 (Instrument)
    2. Funzione 07 – long coding helper
    3. Byte 1
    4. abilitare bit 5


    Lista modifiche da un sito inglese:

    Security Access to modules
    --------------------
    If certain module is locked, you should go to "Security Access" and enter the proper code:
    For [09] Central Electronics the code is 31347 - TESTED AUDI A3 1.2T ‘13
    For [03] ABS Brakes the code is 40168?????????? (doesn’t seem to work)
    For [10] Parking aid the code is 71679

    [09] CENTRAL ELECTRONICS

    Acoustic (Alarm Beep) on Lock - TESTED AUDI A3 1.2T ‘13
    --------------------
    NOTE: Car makes one chirping sound, does not use the horn.
    [09] Central Electronics -> Adaptation ->
    Acknowledgement Signals - Akustische Rueckmeldung verriegeln (Lock acoustic feedback)
    CHANGE: Set each or one of them to Yes

    Acoustic (Alarm Beep) on Unlock - TESTED AUDI A3 1.2T ‘13
    --------------------
    NOTE: Car makes two chirping sounds, does not use the horn.
    [09] Central Electronics -> Adaptation ->
    Acknowledgement Signals - Akustische Rueckmeldung entriegen (Un-lock acoustic feedback)
    CHANGE: Set each or one of them to Yes

    Acoustic Lock Menu (only for lock, enable/disable using DIS) - TESTED AUDI A3 1.2T ‘13
    --------------------
    NOTE: From factory there was no option to enable/disable using DIS.
    [09] Central Electronics -> Adaptation ->
    Acknowledgement Signals -Menuesteuerung akustische Rueckmeldung
    CHANGE: Set Yes

    Visual confirmation of comfort closing - TESTED AUDI A3 1.2T ‘13
    --------------------
    [09] Central Electronics -> Adaptation ->
    Acknowledgement Signals – Comfort closing ack??? (need to check it back)
    CHANGE: Set Yes

    Adaptation of the turn signal cycle - TESTED AUDI A3 1.2T ‘13
    --------------------
    [09] Central Electronics -> Adaptation ->
    Channel (2) Select Turn signal control convenience turn signal flasher cycles – Set 1-5 (def=3)

    Adjustment of the interval of the headlamp cleaning system (SWRA) - NOT TESTED
    --------------------
    [09] Central Electronics -> Adaptation ->
    Channel (1) - Number of operations front windshield wipers wash per SRA activation – Set value
    Channel (3) - windscreen wipers SRA washing time – Set value

    Disable DRL's in Light Switch 'O' Position - NOT TESTED
    --------------------
    [09] Central Electronics -> Adaptation ->
    (9) Tagfahrlicht-Tagfahrlicht nur in Schalterstellung AUTO
    CHANGE: Set Active

    Activation of the parking light the rear lights to LED daytime running lights - NOT TESTED
    --------------------
    [09] Central Electronics -> Adaptation ->
    Channel (6) - daytime running lights activated additionally … -> Active

    Disabling the daytime running lights with the handbrake applied - NOT TESTED
    --------------------
    [09] Central Electronics -> Adaptation ->
    Select off when handbrake daytime running lights - channel (5) - Active

    Cornering lights with Fog Lights - NOT TESTED
    --------------------
    [09] Central Electronics -> Adaptation ->
    Channel Leuchte12NL LB45-light function B12 -> Adjust Value on cornering left
    Channel Leuchte13NL RB5-light function B13 -> Adjust Value on cornering right

    Adjusting the speed thresholds for activating the fog lamps - NOT TESTED
    --------------------
    [09] Central Electronics -> Adaptation ->
    Channel (3) select static cornering light lower speed threshold -> Set value (def=0)
    Channel (4) select static cornering light upper speed threshold -> Set value (def=32km/h)

    [52] DOOR ELECTRONICS, PASSENGER

    Passenger-side mirror lowering when reversing - TESTED AUDI A3 1.2T ‘13
    --------------------
    [52] Door electronics, passenger -> Long coding -> Byte 04
    CHANGE: Enable Bits 2 and 3

    [17] INSTRUMENT CLUSTER

    Enable Pointer Test / Staging / Staging - TESTED AUDI A3 1.2T ‘13
    --------------------
    [17] Instruments -> Coding -> Byte 1 ->
    CHANGE: Enable Bit 0

    Set Oil Temperature on all DIS Menus - TESTED AUDI A3 1.2T ‘13
    --------------------
    [17] Instruments -> Long Coding -> Byte 10
    CHANGE: Tick Bit 1. Display Oil Temperature

    Activation of the lap timer / lap counter in the FIS - TESTED AUDI A3 1.2T ‘13 (DIDN’T WORK)
    --------------------
    NOTE: Seems to work only with Color Information System
    [17] Instruments -> Long Coding -> Byte 1 ->
    CHANGE: Enable Bit 3

    Display the oil temperature gauge in the FIS laptimer (same as above)
    --------------------
    [17] Instruments -> Long Coding -> Byte 1 ->
    CHANGE: Enable Bit 3

    Activation of the switching recommendation in the FIS - TESTED AUDI A3 1.2T ‘13
    --------------------
    [17] Instruments -> Long Coding -> Byte 1 ->
    CHANGE: Enable Bit 5

    Disable seatbelt warning - TESTED AUDI A3 1.2T ‘13
    --------------------
    [17] Instruments -> Long Coding -> Byte 0 ->
    CHANGE: Set bits 2-4 using combo box

    Adjust tire circumference (bigger tires) - NOT TESTED
    --------------------
    [17] Instruments -> Long Coding -> Byte 3 ->
    CHANGE: Set bits 0-2 using combo box (not documented)

    Deactivation of message / tone with ignition on - NOT TESTED
    --------------------
    [17] Instruments -> Adaptation ->
    Ignition active message - change to "No display" (Default value: driver's door)

    Enable display of cylinder deactivation - NOT TESTED
    --------------------
    [17] Instruments -> Adaptation ->
    Select channel cylinder deactivation - Change to enabled (Default value: No display)

    Change start screen - NOT TESTED
    --------------------
    [17] Instruments -> Long Coding -> Byte 9 ->
    CHANGE: Set bits 0-2 using combo box (not documented)

    Display navigation/compass - NOT TESTED (is compass built int, need to test)
    --------------------
    [17] Instruments -> Long Coding -> Byte 10 ->
    CHANGE: Set bit 6, and also Byte 9 bit 3 to change position to bottom

    Indirect TPMS - NOT TESTED (need coding for [03]Brakes and possibly [19]Canbus)
    --------------------
    [17] Instruments -> Long Coding -> Byte 4 ->
    CHANGE: Set bit 0
    [03] Brakes -> Long Coding -> Byte ??? ->
    CHANGE: Set bits ???, ???

    [03] BRAKES ELECTRONICS

    Adaptation of the dynamic start-off - NOT TESTED
    --------------------
    [03] Brakes Electronics -> Adaptation ->
    Select Dynamic pull -> Change value (Default value: quick)

    Adaptation of Hill Start Assistant - NOT TESTED
    --------------------
    [03] Brakes Electronics -> Adaptation ->
    Select Berganfahrassistent??? -> Change value

    Adaptation of the functional state of the Auto Hold setting - NOT TESTED
    --------------------
    [03] Brakes Electronics -> Adaptation ->
    Select AUTO HOLD function state -> Set value: (Default: last setting)
    Last setting: AUTO HOLD uses the last defined setting which was set over the button
    never active: AUTOHOLD not automatically activated
    always active: AUTO HOLD always enabled

    [10] PARK ASSIST

    Adjust Switch Off Speed For Parking Plus - NOT TESTED
    --------------------
    [10] Park/Steer Assist -> Adaptation ->
    Abschaltgeschwindigkeit fur Einparkhilfe or Switch off speed for parking assist
    CHANGE: Set to a speed you like (Standard is 10 km/h)

    Adaptation of the threshold for display of the distance to the object - NOT TESTED
    --------------------
    [10] Parking aid 2 -> Adaptation ->
    Select distance to the curb -> Adjust value (Default value: 15 cm)

    Deactivation activation tone of the parking aid - NOT TESTED
    --------------------
    [10] Parking aid 2 -> Adaptation ->
    Select activation tone for parking aid - Adjust value (Default value: on)

    Adjustment of the requirement for lowering the audio when in parking aid - NOT TESTED
    --------------------
    [10] Parking aid 2 -> Adaptation ->
    Select Request Audio lowering -> Adjust value (Default value: yes)

    Visual representation of the parking aid (Audi Parking System APS) - NOT TESTED
    --------------------
    [10] Parking aid 2 -> Long coding -> Byte 2 ->
    CHANGE: Set Bit 0 - visual representation parking sensors

    [5F] Information electronics

    Enable / disable the Eject Lock CD / DVD drive (rentals and other situations) - NOT TESTED
    --------------------
    [5F] Information Electronics -> Adaptation ->
    Select channel CD eject button or eject lock -> Activate (Eject Lock active)

    Adjusting the microphone sensitivity - NOT TESTED
    --------------------
    [5F] Information electronics -> Adaptation ->
    Select Mikrofonempfindlichtkeit (Microphone sensitivity) – Change value

    [08] CLIMATRONIC/HVAC

    Adjustment of the seat heater level lowering time (level 3 to 2) - NOT TESTED
    --------------------
    [08] HVAC -> Adaptation ->
    Select time until heated seats redemption level 3 to level 2 -> Adjust value (def=10min)
    (Value 0 = no automatic lowering)

    Adjustment of the seat heater level lowering time (level 2 to 1) - NOT TESTED
    --------------------
    [08] HVAC -> Adaptation ->
    Select time until heated seats redemption level 2 to level 1 -> Adjust value (def=0)
    (Value 0 = no automatic lowering)

    Storage of the last set seat heating stage - NOT TESTED
    --------------------
    [08] HVAC -> Adaptation ->
    Select channel storage of the seat heater level driver -> active (def=not active)
    Select channel storage of the passenger seat heating stage -> active (def=not active)

    Adjusting the reheating of the parking heater??? - NOT TESTED
    --------------------
    [08] HVAC -> Adaptation ->
    Select Post-heat heater – Change value (Default: 10 minutes)

    [19] CAN BUS

    Disable Start-stop - NOT TESTED
    --------------------
    [19] Can Gateway -> Adaptation ->
    Channel (1) Start/Stop -> Change value from -50 to the new value of 50 - click Do It
    Channel (2) Start/Stop -> Change value from -50 to the new value of 50 - click Do It.

    --------------------
    OTHER PROCEDURES:
    --------------------

    Access MMI engineering menu
    --------------------
    The engineering menu can be accessed with the following combination: Back button + Navigation button 1 (top left).

    MMI Reset / Restart using monkey grip
    --------------------
    The MMI system in the Audi A3 8V can be restarted by following: Menu button + Confirmation button + Navigation key 3 (top right). The MMI then shuts down and restarts. Takes about 30 seconds.
    Ultima modifica di endy87; 21-04-2014 alle 10:25

  2. Il seguente utente ringrazia Tillmoss per questo messaggio

    ducastreet (19-01-2016)

  3.  

  4. #2
    Audi lover
    Data Registrazione
    Apr 2013
    Messaggi
    217
    Thanked: 0
    Menzionato
    messaggio(i)
    Taggato
    discussione(i)
    Provincia
    Salerno (SA)
    Auto
    Ford Focus sw

    Predefinito

    nel fine settimana faccio le prove e vi rendiconto

  5. #3
    Bannato
    Data Registrazione
    Aug 2013
    Messaggi
    276
    Thanked: 1
    Menzionato
    messaggio(i)
    Taggato
    discussione(i)
    Provincia
    Verona (VR)
    Auto
    A2

    Predefinito

    Speriamo che vadano! Io ho riportato solo questa guida tradotta.

  6. #4
    Direttivo Audi RS Club
    Data Registrazione
    Mar 2010
    Messaggi
    18,024
    Thanked: 128
    Menzionato
    messaggio(i)
    Taggato
    discussione(i)
    Provincia
    Lecce (LE)
    Auto

    Predefinito

    puoi mandare a me in PM le modifiche che vuoi apportare

  7. #5
    Bannato
    Data Registrazione
    Aug 2013
    Messaggi
    276
    Thanked: 1
    Menzionato
    messaggio(i)
    Taggato
    discussione(i)
    Provincia
    Verona (VR)
    Auto
    A2

    Predefinito

    Già fatto grazie! :)

  8. #6
    Bannato
    Data Registrazione
    Aug 2013
    Messaggi
    276
    Thanked: 1
    Menzionato
    messaggio(i)
    Taggato
    discussione(i)
    Provincia
    Verona (VR)
    Auto
    A2

    Predefinito

    Ragazzi sono in contatto con un tedesco che IN TEORIA sa come abilitare qualunque cosa con il vag!!! Domani dovrebbe dirmi se si può abilitare una cosa SUPER SUPER BELLA! per il momento vi lascio con fiato sospeso a domani!!! ;) Ps speriamo di portare buone notizie!

  9. #7
    Audi lover
    Data Registrazione
    Apr 2013
    Messaggi
    217
    Thanked: 0
    Menzionato
    messaggio(i)
    Taggato
    discussione(i)
    Provincia
    Salerno (SA)
    Auto
    Ford Focus sw

    Predefinito

    attendiamo con ansia

  10. #8
    Audi lover L'avatar di cristian23
    Data Registrazione
    Mar 2010
    Messaggi
    980
    Thanked: 0
    Menzionato
    messaggio(i)
    Taggato
    discussione(i)
    Provincia
    Bergamo (BG)
    Auto
    AUDI A3 2.0 150 CAVALLI S.TRONIC

    Predefinito

    Ma l attivazione della luce ambiente scusate ma non capiaco a cosa serve??la luce interna che cambia dal normale??

  11. #9
    Bannato
    Data Registrazione
    Aug 2013
    Messaggi
    276
    Thanked: 1
    Menzionato
    messaggio(i)
    Taggato
    discussione(i)
    Provincia
    Verona (VR)
    Auto
    A2

    Predefinito

    Se guardi gli screenshot piu o meno si capisce quello che fa.... In teoria non tutte le auto escono con il regolatore su MMI delle luci ambiente. Quel tweak serve per sbloccare quella funzione. Poi non so effettivamente a cosa serva....

  12.  

  13. #10
    Audi lover L'avatar di cristian23
    Data Registrazione
    Mar 2010
    Messaggi
    980
    Thanked: 0
    Menzionato
    messaggio(i)
    Taggato
    discussione(i)
    Provincia
    Bergamo (BG)
    Auto
    AUDI A3 2.0 150 CAVALLI S.TRONIC

    Predefinito

    Citazione Originariamente Scritto da Tillmoss Visualizza Messaggio
    Se guardi gli screenshot piu o meno si capisce quello che fa.... In teoria non tutte le auto escono con il regolatore su MMI delle luci ambiente. Quel tweak serve per sbloccare quella funzione. Poi non so effettivamente a cosa serva....
    Ok grazie

Pagina 1 di 115 123456789101151101 ... UltimaUltima

Segnalibri

Permessi di Scrittura

  • Tu non puoi inviare nuove discussioni
  • Tu non puoi inviare risposte
  • Tu non puoi inviare allegati
  • Tu non puoi modificare i tuoi messaggi
  •